It’s a long way to the top, if you wanna rock’n roll…

Posted: November 30, 2016 in Ford Roadsters
Tags: , , , , ,

ImageUploadedByH.A.M.B.1480430128.406726.jpgimageuploadedbyh-a-m-b-1479159604-372035

There are a myriad of thankless, frustrating chores to do when building a car, that go un-notced and unappreciated by most, but I think I’m through with the most aggravating of them.  The steering box, which eluded my efforts yesterday to place on the frame and not have it occupy the same spot as the exhaust header and engine mount, I figured out today.  It was tempting to start ordering new parts, but I went out this morning with a new outlook and got it mounted under the engine mount, below and just forward of the exhaust dump, and where the drag link and tie rod are parallel, as they should be.

gnrs_2009_116

I ordered the lovely finned aluminum backing plates with Lincoln self adjusting and self actuating internals from Wilson Welding (thanks Bronson Battle Creek for the bonus that paid for that!), they’ll look killer with the Buick brake drums I already have.  There are some needed trinket parts on the way too from Mac’s Garage,  and I have to bend the steering arms down for clearance due to the dropped axle, but that’s the extent, as far as I can see, of the fabrication/modification I have yet to do before I blow it completely apart.

I’ve decided on color for the body and interior, so the next phase is final welding and finishing of the chassis, then prep it and the body for paint.  The top bows are mounted, lowered into the body 2″ to match the chopped windshield, the weathered Haartz canvas will be trimmed at the bottom edge to meed the body at the belt line the way it should.  The door gaps have been (roughly) fitted, the hood and radiator gaps fitted, and I think I can duplicate the shimming, twisting, tweaking and twisting that got them as close as they are.  The engine and trans are out, I hope to have a couple buddies come over Thursday (my 62nd birthday!) and lift the body off the frame so work on the frame can commence.

Having a ’34 highboy roadster has been a dream of mine for almost 40 years, hopefully by next spring a car very similar to the one gracing the cover of this issue of “Rodders Journal” will roll out of my garage. It’s a long road, but I’m getting there…

12278781_10208632693317401_6682828544109353726_n

Advertisements
Comments
  1. Kim says:

    I see more adventures in our future!

  2. Keith says:

    Glad you’ve got a satisfactory solution to the steering box placement issue. See that you got some good responses regarding that on the HAMB. And the color choice is?

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s